Are you building something with RP2040 (32-bit Dual Cortex-M0+)? The RP2040 Stamp integrates the Raspberry Pi RP2040 with 8MB of FLASH, an LDO, LiPo charge management, a reset button, and a Neopixel all in the size of a stamp.
This all in one package may make your life easier as it can be surface mounted on any projects easily.
At only 1 by 1 inch, the Stamp packs a lot of features including the following:
1. 8MB Flash
2. 500mA 3.3V LDO
3. All 30 GPIOs broken out
4. A Neopixel
5. LiPo supply and charging circuit (with charging LED)
6. USB & SWD broken out
7. Reset Button
8. Carrier board support
And of course, everything that comes with the Raspberry Pi RP2040 itself like Dual core ARM Cortex-M0+ @ 133MHz, 264kB SRAM, 2 UARTs, 2 SPIs, 2 I2Cs, 16 PWM channels and USB with Host and Device support.
For more info on the module: https://lnkd.in/gbcWEgZg
For more such embedded quickbits follow me on LinkedIn & subscribe my YouTube Channel: https://lnkd.in/gVVtf9qH
Comments